Moore's Toys 1/64 9750 STS Fixes
Custom Cutter Logger Tires
If you want single front tires the widest so far is Standi's 850-60X38s or if you can find pair of tires off road champs monster trucks are real wide. The rear tires on the combine pictured are off the Ertl Terragator. Standi is going to have 68X50X30.5 tire sometime???? We carry all Standi's tires, and we also give you axle rod and spacers so they look like real ones. Any questions email us email@example.com
Header not in proper location: For those who don't want to install our raise able feeder housing kit.
Here's one way you can fix it. File or sand off top sides-edges of it so header fits back against the front of it. Drill 1/16 hole at white dot location in picture #1. then re drill hole using 3/32 bit. Cut piece 3/32 rod to correct width. and super glue in place. You can also put epoxy on inside of it if desired. Touch up paint. Any questions email us firstname.lastname@example.org
Moore's Toys full detail kit and raise able feeder house.
Auger Height Fix
Tools needed: Saftey glasses, drill and 3/16 bit,super glue andDevcon 5 minute epoxy, phillips screwdriver,needle nose pliers, &piece of brass or aluminum tubing 3/16 od. X 3/4" long .014 wall thickness.
To reposition long unloading auger:
Remove screws holding body halfs together, and screw holding grain bin extension to upper body halve. Cut or grind off tabs on auger and remove it. Drill 3/16 hole in combine at angle pictured so auger will set at the correct position when out. install auger into tube and into combine. Reinstall bin extension and fasten with screw, position auger and tube at correct angle. It may be necessary to redrill the hole to get the correct angle. When you have the correct angle, epoxy tube in place. It may also be necessary to sand some off rear side of auger ring so it fits straight back in the transport position.
Reassemble combine . Touch up paint if needed. Any questions you can email us at email@example.com
Return to Mainpage
Please direct Comments or questions to Webmaster@toytractorshow.com
Published 04/27/2000 © All Rights Reserved 2000, 2001, 2002.
This Website created and maintained by: TTS
The John Deere, CaseIH, IH, J.I. Case, Steiger, McCormick Intl., Cub Cadet, Ford-New Holland, New Holland Versatile, Oliver, Minneapolis-Moline, White, AGCO, Allis-Chalmers, Deutz-Allis, Massey Ferguson, Big Bud, Caterpillar, Kinze, Byron and Ertl logo are trademarks of their respective Corporations. They are respectfully used for identification purposes only.
Pictures from TTS may not be copied or used on other websites with out permission from the webmaster.